Updated 14 Aug 2017
Fisher & Paykel
RF522BRPW6
Snapshot: The Fisher & Paykel RF522BRPW6 is a large bottom-mounted fridge-freezer with a total capacity of 519L. How well does it perform?
Join us now to unlock this content
Unlock all of Consumer from just $7 for 7 days
- Heaps of buying advice so you can choose with confidence
- Independent reviews of thousands of products and services
- Personal advice an email or phone call away on our advice line (members only)
Test results
Overall score (%)
Fluctuations
Combinations
Uniformity
Seasonal change
Recommended settings
Good points
- Very good range of fridge and freezer temperature combinations.
- Very good at minimising temperature fluctuations.
- Fridge temperature is very close to uniform.
- Very good at handling seasonal temperature change.
- Energy consumption is as claimed.
- Self-closing doors.
But
- Freezer temperature isn’t uniform (there’s moderate variation).
- Door bottle-shelf can be too warm for best storage of perishable foods (milk and dairy products) at some temperature settings.
- No chiller.
How we test
Overall score includes:
Fluctuations (30%): measures how much the temperature inside the fridge fluctuates (or swings) as the compressor starts and stops. The higher the score, the less the temperature fluctuates.
Combinations (25%): where we measure the temperature in the fridge and freezer compartments at the same time. A high score means the temperature in both compartments are managed well, for example if the freezer is set to its coldest setting, the temperature in the fridge isn’t affected.
Uniformity (20%): a measure of how uniform he temperature is throughout each compartment. The higher the score, the more uniform the temperature is in each compartment.
Seasonal change (20%): a test of how well the appliance deals with changing temperatures outside. We test in a temperature controlled room. We adjust the temperatures to simulated winter and summer conditions while monitoring the temperature inside the fridge. The higher the sore, the better the fridge dealt with the changing temperatures, meaning little adjustment would be needed throughout the seasons.
Recommended settings (5%): a test of how well the fridge performs on the manufacturers recommended settings. Many people will only change the temperature setting once, so we test with this setting. If there isn’t a recommended setting, then we test using the factory set or mid-setting.
What about energy use?
We assess energy usage based on the manufacturer’s claimed energy usage as well as measured energy usage. A pass means the measured energy usage was no more than 7.5 percent higher than claimed, anything over that is a fail. Once a fridge fails, we stop measuring. In previous tests, we would have kept testing to find a maximum energy usage reading. By changing our test we can now test more fridges each year than ever before.
Claimed energy use is the amount of energy (in kW/h) the manufacturer says its fridge uses. If a fridge uses more power than claimed, it’s not necessarily bad, just not as efficient as claimed.
